Please use this identifier to cite or link to this item: http://www.dspace.espol.edu.ec/handle/123456789/10075
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSalazar Rodríguez, William-
dc.contributor.authorPeña Estrella, Julián-
dc.date.accessioned2010-05-14-
dc.date.available2010-05-14-
dc.date.issued2010-05-14-
dc.identifier.urihttp://www.dspace.espol.edu.ec/handle/123456789/10075-
dc.description.abstractThis tesis deals with the feasibility study on two thechniques for the metallography of a component in field analysis differs greatly from that done in a laboratory. component, a Catalytic Oven, to carry out the study of these two techniques: The Met of a portable microscope. In the first chapter, general considerations are mentioned, along with the theoretical aspects as far as regards non-destructive Metallography. The second chapter details the work plan is used for the inspection of a component in the field. It is on the experience gained by inspecting the component, the difficulties presented depending on your configuration, and the areas to be analyzed, at whic is more convenient to use. In the third chapter, we analyze the feasibility of each method, then test them in the analysis of a structural component. In the fourth chapter provides the conclu the use of each method.en
dc.language.isospaen
dc.rightsopenAccess-
dc.subjectHORNO CATALÍTICOen
dc.subjectMETALOGRAFÍAen
dc.subjectRÉPLICAS METALOGRÁFICASen
dc.subjectMICROSCOPIO METALOGRÁFICO.en
dc.titleEstudio de factibilidad en técnicas no destructivas para realizar metalografía en campo de componentes estructurales: réplicas metalográficas y microscopio portátilen
dc.typeArticleen
Appears in Collections:Artículos de Tesis de Grado - FIMCP

Files in This Item:
File Description SizeFormat 
Estudio de Factibilidad en técnicas no destructivas para realizar metalografíax.pdf1.01 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.