Por favor, use este identificador para citar o enlazar este ítem: http://www.dspace.espol.edu.ec/handle/123456789/29552
Título : Aplicación de procedimientos del fabricante en la reparación del sistema de inyección electrónica
Autor : VILLALTA ROMERO, LUIS ALBERTO
VARGAS AYALA, LUIS MANUEL
Palabras clave : INYECCION
REPARACION
ELECTRÓNICA
Fecha de publicación : may-2015
Resumen : The present Project is based on acquired knows in PROTMEC classrooms, its target is the installation of the Electronic Fuel Injection. For this reason , it´s pick the Jeep Grand Cherokee model 1996, for the Fuel Injection System reconstruction, type MPFI; this system has several components that are used on actually vehicles, even had consideration the manufacturer´s car and rebuild information. Some systems components were fixed and others were installed that they´re not on the car. Then check the correct function of the Fuel System with the use of electronic diagnosis tool and the use of electrical diagrams that indicated the specific characteristics of each component and function. This project brings a help to the Tecnologia Mecanica Automotriz´s students to learn best the function of Electronic Fuel Injection System.
URI : http://www.dspace.espol.edu.ec/handle/123456789/29552
Aparece en las colecciones: Tesis de Grado - INTEC

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
TESIS Luis Villalta.pdfARTICULO PRINCIPAL DE TESIS2.47 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.