Por favor, use este identificador para citar o enlazar este ítem: http://www.dspace.espol.edu.ec/handle/123456789/6246
Título : Análisis técnico económico para incrementar la producción del campo parahuacu de petroproducción mediante la tecnica del fracturamiento hidraulico
Autor : Plaza León, Joel Adán
Cárdenas Dávila, Vanessa Geoconda
Palabras clave : CAMPO PARAHUACU
TÉCNICA DEL FRACTURAMIENTO HIDRÁULICO
Fecha de publicación : 2008
Resumen : This project presents a feasibility study to increase the production of the Field Parahuacu of Petroproducción by means of the technique the hydraulic Fracturing; The field Parahuacu, it was discovered by the Company Texaco-Gulf in October 1968 with the perforation of the exploratory well PRH Nº 1. This field has eight wells at the moment which two have already been fractured. The objective gives this work it is based on determining the profitability it gives the wells that have already been fractured and to select some well candidate to know if it is convenient to apply the technique of hydraulic Fracturing. This article will start to analyze the parameters of three wells in study and of the reservoir. After having analyzed the three wells, we was carried out the design and simulation gives the fracturing and finally we is carried out the economic analysis with the purpose of determining if the fracturing carried out in the two wells was profitable for the company, in the selected well as candidate to fracture was carried out an economic analysis.
Descripción : Este proyecto presenta un estudio de factibilidad para incrementar la producción del Campo Parahuacu de Petroproducción mediante la técnica del fracturamiento hidráulico; El campo Parahuacu, fue descubierto por la Compañía Texaco-Gulf en Octubre de 1968 con la perforación del pozo exploratorio PRH Nº 1. Este campo cuenta actualmente con ocho pozos de los cuales dos ya han sido fracturados. El objetivo de este trabajo se basa en determinar la rentabilidad de los pozos que ya han sido fracturados y seleccionar algún pozo candidato para saber si es conveniente aplicar la técnica del fracturamiento hidráulico. Este artículo comenzará analizando los parámetros de los tres pozos en estudio y del yacimiento. Luego de analizados los tres pozos, se realiza el diseño y simulación del fracturamiento y finalmente se realiza el análisis económico con el fin de determinar si el fracturamiento realizado en los dos pozos fue rentable para la compañía, en el pozo seleccionado como candidato para fracturar también se realizó un análisis económico.
URI : http://www.dspace.espol.edu.ec/handle/123456789/6246
Aparece en las colecciones: Tesis de Petróleos



Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.